Presma® AR-10 .308 M-LOK Series Slim Free Float Handguard
10" Length, ID 1.54"
NOTE: The top rail will only fit flush with DPMS .308 High Profile Uppers - check by measuring the tang at the rear of upper (see photo below).
** All free float handguards ship with the barrel nut inside the handguard - look for the threads & remove to begin install process **
- Not suitable for Armalite AR-10 or Low Profile DPMS (upper tang measures 0.151" instead of 0.210")
- Attaches directly to upper receiver via steel barrel nut (included)
- Free float design
- Full length Picatinny top rail plus additional mini rails
- M-LOK slots on left, right and bottom
- 6061-T6 aluminum alloy
- U.S Anodization + Laser engraved t-marks (rail numbers)
- Barrel nut is clamp-on, no timing shims required (easy install)
|ITEM||TYPE||Length||Picatinny||M-LOK||Anodized USA||I.D.||BARREL NUT||Material|
|T / L / R / B||L / R / B|
|M38ML10-H||DPMS .308 High Profile
||10"||23 / 5 / 5 / 3||3 / 3 / 3||✔||1.54"||Steel||6061-T6|
Barrel nut fits 35mm crowsfoot wrench (not included).